Scrapbook Layout Them Bones

 

Welcome Stampers to our Creative Cardiology Team October 2023 Blog Hop! For this month we're showcasing projects to do with  the Scrapbooking / Sampler. I do a scrapbooking class each month and this is the Layout we are going to be making for are October class. I choose to use the Bag of Bones stamp and paper. I tried to make the photo mats look like tombstones Do you scrapbook or do samplers?  Let me know in the comments below. 

Here are the details of my scrapbook page:

(2)  sheets 12 x 12 basic gray or black will work 

(2)  sheets 8 1/2 x 11 Blueberry bushel

(2) sheets  8 1/2 x 11 basic Gray

(1/2) sheet 8 1/2 x 5 1/2 basic white

Pack of DSP Called Them Bones 

First thing you need to do is heat and emboss the white stars. On the blueberry bushel paper. I used the star from the Merry and Bright stamp set. ( if you need to know how to heat and emboss check out this video)

Next take the bat from the Bag of Bones stamp and black Ink and stamp in-between the stars. 

Now sponge the outside of the blueberry bushel paper with black Ink

Now you can add them to your scrapbooking Basic Gray or Black 12 x 12. One on each side. Look at photo one goes vertical and one goes horizontal. If you used Basic Gray 12 x 12 you will need to sponge around the outside with black ink.

DSP Them Bones Look at photo and pull out the same paper that i used. 

The DSP with Tombstones- Cut in 1/2  (6 x 12 )

The DSP with Houndstooth orange Cut that (3 x 12

The DSP with dancing skeletons Cut that (2 x 12) 

The DSP with all  cutouts pick the one that looks like  the  one on the left side of my layout.

Now add them to your pages as seen in photo. Note the dancing skeletons overlap the houndstooth. When putting down the Houndstooth start at a 1 1/4 over.

Now take the 8 1/2 x 5 1/2 white and stamp 3 skeleton bodys, 2 dogs and 2 cats in black ink and die cut them out with the dies.

Photo Mats

(3) 4 1/4 x 6 1/4 

(2) 3 5/8 circles 

(1) 3 1/4 circles

Note I used the retired circle die but i think the Deckled Circles  dies would look really cool on this page.

Now if you went to make them look like tombstones you will need to use the Basic Borders Dies to cut the tops off a little. Then I just took a black marker and outline the photo mats see photo above.

Photo size for mats with out them looking like tombstones are 

(3) 4 x 6 , (2)  circles 3 1/2, (1) circle  3 1/4

Photo size for mats with tombstones look.

(1) 4 x 5 5/8, (2) 3 x 5 3/4 , (2) circles 3 1/2 (1) circle 3 1/4 

Now add your mats and skeleton figures to your layout. 

I did not add a title to my page up but there is room for one on the left side of my layout. 

Also you can always use one of the circle for a journaling spot instead of a photo.

If you could take a few minutes to do me a favor and check out my other team members pages. We all work very hard on these blog hops. Just let them know you hop over from Bonnies Creative Place. If you could leave me a comment and share my page it will help my blog grow. 

If you would like to get a monthly newsletter from me the link is at the top of this page.

 

Thanks for stopping by. Bonnie~

Team members Links

Kim Thompson

Jessica Brigden

Diana Buckinghan

Print Recipe

Product List

162219 $51.25	161946 $20.00	162215 $12.50	161715 $13.50
146968 $10.00	121044 $10.00	159276 $10.50	155558 $29.00
162286 $37.00	155554 $18.00	129053 $31.00	132708 $6.50
102283 $9.50

Beary Cute Bear Card

 

Hello stampers, I am had a Christmas card event On October 8th at my home and this is one for the 6 cards we will be making today. I have posted the details to my card and a supply list below if you would like to try and make this card.

 Note Print the Recipe below for measurements of papers.

1.   Add Balmy Blue card stock to the base white cardstock.

2.   Take the white cardstock and the blending brush to make an oval in the center with the balmy blue ink.

3.   Stamp the snowflakes on top of the ink you just blended on the white cardstock.

4.   Stamp out the bears in black ink.  Stamp the scarf on the bigger bear with balmy blue ink.

5.   You will use the bear punch for punching out the bigger bear. You will have to fussy cut out the little bear. 

6.   Stamp Merry Christmas in black ink as seen on card.

7.   Add this to top of the balmy blue you put on the base.

8.   Add your bears and gems.

Print Recipe

Product List

162023 $42.25	159276 $10.50	146982 $10.00	147105 $9.00
132708 $6.50	153611 $13.00	162029 $8.00

Merry and Bright Card

 

Hello stampers, I am had a Christmas card event On October 8th at my home and this is one for the 6 cards we will be making today. I have posted the details to my card and a supply list below if you would like to try and make this card.

 Note Print the Recipe below for measurements of papers.

1.     Fold Base card White in 1/2.

2.     Take daffodil delight 5 ¼ x 4 and emboss them with the music notes embossing folder. You now can add them to your base.

3.     Next take the white 2 x 4 ½ and stamp 4 lights two in each color balmy blue and melon mambo

4.     Take your silver card stock and the lights you just stamped and die cut them out. With the silver you are die cutting the tops of the light

5.     Attached the tops of the lights to the light bulb. Using the sliver string and attaching it to the back of the bulb. I add dimensionals on the back of the light bulbs.  Set it aside.

6.     Take the white 2 ¾ x 4 and stamp FALALA to the bottom in black ink on both pieces. Stamp the flash of light in balmy blue and melon mambo ink as seen in photo.

7.     Then add the light Bulbs you set aside right above them. attach the silver string around to the back. Then add to the black 3 x 4 ¼ card stock.

8.     Add the Black cardstock to the base with dimensionals.

9.     Add 3 Gems to each card.

Print Recipe

Product List

161951 $47.50	160888 $23.00	159276 $10.50	119683 $10.00
121045 $10.00	132622 $5.00	147105 $9.00	147051 $9.00
132708 $6.50	156392 $11.00	155766 $7.50	158130 $7.50

Berry Card

 

Hello stampers, I am had a Christmas card event On October 8th at my home and this is one for the 6 cards we will be making today. I have posted the details to my card and a supply list below if you would like to try and make this card.

Note Print the Recipe below for measurements of papers.

1.   Fold Base card White in 1/2.
2.    Add the blueberry and lost Lagoon card stock to the card as seen in photo.
3.    Then add the DSP to the lost lagoon card stock as seen in photo.
4. Now using the Marks Blueberry and Lost Lagoon color the stamp with brush end of the makers. Then huff on the stamp with your breathe and stamp on to the 8 ½ x 1 ½ white card stock. Clean stamp off and repeat for second card. Also stamp two greeting on the same white card stock

        5. using dies to cut out the berries you just stamped and two leaves with the Lost Lagoon card stock 

              7 x 1 ½. Using the oval punch to punch your greetings out. 

   6.    using the scalp part of the oval punch and punch out to two in blueberry card stock. I used                          dimensionals to pop up the greeting. 

Print Recipe

Product List

162144 $57.50	146982 $10.00	133679 $10.00	162133 $12.50
159276 $10.50	154242 $22.00	132708 $6.50	161694 $38.50

Trucking Along card

 Hello stampers, I am had a Christmas card event October 8th at my home and this is one for the 6 cards we will be making today. I have posted the details to my card and a supply list below if you would like to try and make this card.

Note Print the Recipe below for measurements of papers.

1.    Fold Base white card stock in 1/2.
2.   The Emboss both Balmy Blue card stock 5 ¼ x 4 with the snowflake embossing folder NOTE: THIS IS NOT A 3D EMBOSSING FOLDER SO YOU NEED TO USE PLATEFORM 1 AND BOTH PLATEFORM 2s WHEN EMBOSSING. Now add the embossed snowflake piece to the base card.
3.    Next take your 8 x 1 ¼ White card stock and stamp two trucks and two gifts on black ink. Color the them with the blends. Fussy Cut out the Gifts and use the truck punch to punch out the trucks.
4.    Now take the ½ by 5 ½ Balmy Blue cardstock and stamp the greeting in black ink. Make a flag cut on the end.
5. Now Add your DSP, Greeting and truck to the card. I used dimensionals to pop up the truck.

Print Recipe

Product List

162299 $24.00	162305 $22.00	159276 $10.50	161724 $10.00
162118 $12.50	162026 $11.00	154830 $10.00	154843 $10.00
161659 $10.00